Fully electronic pumps designed for domestic water supply for urban and rural water storage tanks. Designed completely from nonferrous materials to avoid the effects of corrosion. Automatic electronic pump control provides constant pressure at low to full flows and provides dry run protection. The auto restart looks for water if the pump runs out. Automatic control incorporates electrical surge protection, rotatable pump connection and in-built check valve.

The pump is a surface mounted pressure system pump supplied ready to install. The unit is ideal for flooded suction and can handle suction lifts to 3m.

 

Motor / power: 450W
Max. flow:  55 litres / minute

Taps: 5 taps
Head: 37m
Suction hose diameter: 1″ / 25mm
Pressure: 320kPa
Body Material: Stainless Steel
Weight: 8kg
400mm x W 235mm x H 445mm
Warranty on pump: 2 Years

AS/NZS 4020 approved for drinking water

The pump is characterised by:

  • Includes fully electronic pump controller for automatic pump starting, stopping and restart after power loss and water loss.
  • Run dry protection to prevent pump damage
  • Automatic electronic control has in-built check valve to prevent water backflow through the pump.
  • 2.2bar pump cut in for greater versatility.
  • Corrosion resistant pump body, diffuser and impeller to ensure pump durability
  • High quality mechanical shaft seal and high quality bearings
  • 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.