2000L Slimline & Pump for Double Storey

$1,150

Availability:
In Stock
Product Code:
SL2+HHR550
Brand:
S-Line

Available Options

Description

S-Line 2000L Slimline Rainwater Tank


Capacity 2000L
Height 2000mm
Length 2400mm
Width 565mm
Leaf Strainer Yes
Number of Outlets 4
Outlet Size 1 inch Brass
Overflow 90mm cut on site
Colours Available Standard Colorbond Colours
Manufacturer's Warranty 10 Years

Bianco MK6-FERRO60MPCX Self Priming Cast Iron Jet Pressure Pump

The pump is a self-priming surface mounted cast iron jet pump supplied with plug and play leads (IEC type). Pump is designed for domestic household water supply, water transfer, tank fillling, garden and irrigation applications The self-priming ability provides excellent suction capacity of up to 9m.

Features and benefits:

  • Corrosion resistant pump body, diffuser and impeller to ensure pump durability
  • Cataphoresis1 treatment of pump body for rust prevention to ensure no water discoloration or suspended particles
  • High quality mechanical shaft seal and high quality bearings
  • 240V single phase TEFC motor with in-built auto reset thermal overload to prevent the pump from overheating.
  • AS/NZS 4020 Drinking Water Approved for consumer peace of mind
     

     

    Model Hyjet HHR-550 Mains Switch Over
    Power 550W
    Flow Rate 60 litres / minute
    Head Height 38m
    Body AISI 304 Stainless Steel Motor & Pump Shaft
    Pump Inlet Size 1 inch
    Pump Outlet Size 3/4 inch
    Mains Inlet Size 3/4 inch
    Pressure 370kPa
    Pump Warranty 2 years
    Approved for drinking water AUS/NZS 4020 Approved

    Motor / power: 600W Volt: 240V Horsepower: 0.8hp Head: 45m Max Flow Rate: 58lt/min Taps: 4 taps Warranty on pump: 2 Year 

    Body: Cast Iron & Technopolymer (Cataphoresis is an electrochemical coating process for metallic surfaces widely used in the industry due to its penetration and long life, either as a priming coat or finished paint for corrosion resistance.) Bianco Rainsaver MK6 Mains Switchover The Rainsaver MK6 replaces all changeover devices switches your system between tank water and town/mains water supply. The system is switched hydraulically, thus requiring no power, and is the least likely system to fail. It also requires the least amount of installation time, saving you time and money. The Bianco Rainsaver MK6 delimits your mains water supply to 200kPa. As long as the pump can supply water greater than 200kPa, which our selected pumps do, it will output tank water. When the water in the tank is insufficient to supply the system, mains water supply is delivered to the home at 200kPa. There is a pressure drop during the time the system is using mains water supply. The max mains pressure you will get is 200kPa to those taps to which the system is connected. This is normally just the toilets and a couple of outdoor taps. Once the water level in the tanks increases, the system will automatically return to tank supply at full power once again. As a guide, in Melbourne and Sydney, mains water at the home is between 380 and 600kPa. ALTERNATIVLY;

 

Model Hyjet HHR-550 Mains Switch Over
Power 550W
Flow Rate 60 litres / minute
Head Height 38m
Body AISI 304 Stainless Steel Motor & Pump Shaft
Pump Inlet Size 1 inch
Pump Outlet Size 3/4 inch
Mains Inlet Size 3/4 inch
Pressure 370kPa
Pump Warranty 2 years
Approved for drinking water AUS/NZS 4020 Approved

 

Hyjet HHR-550 Mains Switch 

The HYJET HHR-550 is an automatic Rain / Mains change over pump system allowing tank water to be used for water supply in preference to mains water. The HYJET HHR-550 has a quality proven electronic pressure controller which automatically starts the pump when there is demand for water supply. The pressure controller will only operate the pump if tank water is available. The HYJET HHR-550 will automatically switch to mains water when tank water is empty and in case of power failure. The HYJET HHR-550 does not require an in-tank float switch which makes the system quick and easy to install.

Motor / power: 550W
Max. flow:  60 litres / minute
Head: 38m
Pump Inlet diameter: 1″
Mains Inlet diameter: 3/4″
Outlet diameter: 3/4″
Pump Style: Above Ground
Body Material: AISI 304 stainless steel motor and pump shaft
Warranty on pump: 2 Years

Features

  • No in-tank float switch
  • Quick & Easy to install
  • Suitable for single & double storey homes
  • Automatically switches to mains in case of power failure
  • Watermarked dual check valve for back flow prevention

Application

  • Household water supply & irrigation
  • Submersible installation
  • Water transfer
  • Pressure boosting
  • Industrial wash down

Operating Limits

  • Max. flow rate 60 L/m
  • Max. mains pressure – limited 200 kPa
  • Max. head 38m
  • Max. liquid temperature: 60°C
  • Max. ambient temperature: 40°C
  • Voltage 240V, 50Hz

Materials

  • Pump casing: Stainless steel AISI 304
  • Motor shaft: Stainless steel AISI 304
  • Impellers: polymer
  • Mechanical seal: graphite / ceramic / NBR

Photos (5)

Why Choose Kerrimuir Rain Water Tanks?

Kerrimuir has proven itself to be a well established company, supplying customers all over Victoria with quality products at an exceptional service whilst constantly maintaining the lowest prices. Our rain water tanks Melbourne are the cheapest you will find in Victoria. If not, find us a better price and we won't just match it, we'll beat it. In late 2012, the Kerrimuir website was purchased by ASC Water Tanks. ASC Water Tanks Melbourne have already been established for over five years, and in 2011, the company purchased M2 Greener Living Solutions. These amalgamations bring the customer a larger product range, better pricing through more volume buying, and exceptional service unparalleled in the market. Call us today on 1300 229 606.

Contact Us

1300 229 606
sales@kerrimuir.com.au